Product Name:Automatic Spot Welder For L Type Nickel Tabs Weld
Model of device: BSW-88
Application:For weld L type nickel tabs to PCB
This device improves the accuracy of spot welding by adopting servo motor to control the traveling of single inching. The average spot-welding time of each point is 0.2s. When compared with manual spot welding, it has made a great improvement on spot-welding efficiency, accuracy and reliability of welding points, which really realizes the automation of spot welding.
Operating environment: Please don’t use it in the occasions with high temperature, high humidity, vibrations or shocks, metal dust and many welding spatters.
1.Dimension of device: 1060mm (Length) * 860mm (Width) * 1700mm (height);
2.Weight of device: 445 Kg;
3.Component of device: 2 battery pack spot-welder handpiece, 2 power sources (one piece on the left side and one on right side);
4.Modes of spot welding: salient-point spot welding and sharp-point spot welding;
5.Power supply of device: AC220V/50Hz;
6.Air supply of device: air pipe (dia. 8mm);
7.Gas displacement of device: 0.113L/S;
8.Servo motor control: X axis &Y axis & Z axis;
9.Resolution of device: 0.1mm;
10.Built-in spot-welding timing, function of resuming from break point;
11.Yield count and alarm prompting of electrode usage limit;
12.Store multiple groups of spot-welding recipes; support the connection with PC machine;
13.Rotating function of Handpiece;
· Avoid touching weld spots immediately after the weld has been performed as they will be hot.
· Always wear safety glasses when working with spot welders and weld heads.
· Be careful not to pinch fingers in moving weld head parts or between welding electrodes.
· Remove hand jewelry before welding.